Appalachian Stove & Fabricators XLB Panduan Instalasi dan Pengoperasian - Halaman 10
Jelajahi secara online atau unduh pdf Panduan Instalasi dan Pengoperasian untuk Kompor Appalachian Stove & Fabricators XLB. Appalachian Stove & Fabricators XLB 19 halaman. Zero-clearance
Halaman CetakV . INSTALLING THE BRASS TRIM
1. STANDARD BRASS
(A) Spring damper handle - screw the handle onto the
damper rod counter-clockwise.
(B) The draft knob is screwed directly into the hole in the
draft side plate.
(C) Installed for your convenience at the factory is the
FIGURE 11
door handle spring.
2. OPTIONAL BRASS
(A) Brass for front edge of stove:
This brass is installed around the outside edge of the
stove unit. It may be used with both freestanding and
fireplace units. If used in combination with the optional
trim panels for fireplace units, attach the trim panels first.
1. Mount top and side strips to trim panels with self
tapping brass screws provided. Leave approximately 1" at
top edges of trim to be covered by corner brass. If needed,
strips can easily be cut with a hacksaw.
FIGURE 12
DRAFT KNOB
2. Mount two brass corners overlapping top and side
brass strips.
3. Remove protective coating from brass strips before use.
FIGURE 13
FRONT EDGE BRASS
10