Appalachian Stove & Fabricators XLB 설치 및 운영 매뉴얼 - 페이지 10

{카테고리_이름} Appalachian Stove & Fabricators XLB에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Appalachian Stove & Fabricators XLB 19 페이지. Zero-clearance

V . INSTALLING THE BRASS TRIM

(A) Spring damper handle - screw the handle onto the

damper rod counter-clockwise.

(B) The draft knob is screwed directly into the hole in the

draft side plate.

FIGURE 11

door handle spring.

(A) Brass for front edge of stove:

This brass is installed around the outside edge of the

stove unit. It may be used with both freestanding and

fireplace units. If used in combination with the optional

trim panels for fireplace units, attach the trim panels first.

1. Mount top and side strips to trim panels with self

tapping brass screws provided. Leave approximately 1" at

top edges of trim to be covered by corner brass. If needed,

strips can easily be cut with a hacksaw.

FIGURE 12

DRAFT KNOB

2. Mount two brass corners overlapping top and side

brass strips.

3. Remove protective coating from brass strips before use.

FIGURE 13

FRONT EDGE BRASS