Data Connect DSP19.2FP Petunjuk Instalasi - Halaman 2

Jelajahi secara online atau unduh pdf Petunjuk Instalasi untuk Modem Data Connect DSP19.2FP. Data Connect DSP19.2FP 3 halaman. Fast poll modem

Halaman Cetak
Installation Instructions for DSP19.2 Fast Poll
The installation instructs provide below are intended for the installation of
the field upgrade kits EN3-KIT-WB (for wall-mount) and EN3-KIT-DIN (for
DIN rail mounting). If your modems already come with the front and rear
"L-Shape" brackets attached, please skip the first 3 steps for replace the
panels and go directly to install the modems on the wall or DIN rails.
Installing the wall-mount kit:
1.
Place the DSP19.2FP modem on a desk or table top with the bottom faced upward.
2.
Remove the rear panel by removing the 4 screws and replace it with the "L-Shape" rear panel
mounting bracket onto the end of the modem by aligning with the connectors of the modem board.
3.
Remove the front panel by removing the 4 screws and replace it with the "L-Shape" front panel
mounting bracket onto the end of the modem, by aligning with the L.E.Ds and switch.
4.
Installed the modem with the "L-Shape" mounting brackets attached onto the wall or panel using the
screws provided.
DSP19.2FP with wall-mount front panel
DSP19.2FP with wall-mount rear panel