Data Connect DSP19.2FP Istruzioni per l'installazione - Pagina 2

Sfoglia online o scarica il pdf Istruzioni per l'installazione per Modem Data Connect DSP19.2FP. Data Connect DSP19.2FP 3. Fast poll modem

Stampa la pagina
Installation Instructions for DSP19.2 Fast Poll
The installation instructs provide below are intended for the installation of
the field upgrade kits EN3-KIT-WB (for wall-mount) and EN3-KIT-DIN (for
DIN rail mounting). If your modems already come with the front and rear
"L-Shape" brackets attached, please skip the first 3 steps for replace the
panels and go directly to install the modems on the wall or DIN rails.
Installing the wall-mount kit:
1.
Place the DSP19.2FP modem on a desk or table top with the bottom faced upward.
2.
Remove the rear panel by removing the 4 screws and replace it with the "L-Shape" rear panel
mounting bracket onto the end of the modem by aligning with the connectors of the modem board.
3.
Remove the front panel by removing the 4 screws and replace it with the "L-Shape" front panel
mounting bracket onto the end of the modem, by aligning with the L.E.Ds and switch.
4.
Installed the modem with the "L-Shape" mounting brackets attached onto the wall or panel using the
screws provided.
DSP19.2FP with wall-mount front panel
DSP19.2FP with wall-mount rear panel