Appareo Stratus Power Panduan Petunjuk Instalasi - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Beralih Appareo Stratus Power. Appareo Stratus Power 12 halaman. Dual 2.1 amp usb charging hub
Halaman Cetak
Output Voltage Range
Max Current Output
Power Output
*includes mating connector, excludes bend radius
1.6.
Required tools
The following tools are needed for installation of Stratus Power.
Tool
1 ¼ inch drill bit
Multimeter
Crimp tool
1.7.
Supplied hardware
Stratus Power Assembly
Stratus Power Panel Cover
Screw
Power Connector Receptacle
Connector Terminals
1.8.
Unpacking/inspection requirements
When unpacking Stratus Power, visually inspect for any damage to the unit or missing
components. If damage or missing parts are present, contact Appareo.
1.9.
Limitations for installation
This article meets the minimum performance and quality control standards required by a
technical standard order (TSO). If you are installing this article on or in a specific type or class of
aircraft, you must obtain separate approval for installation.
1.10.
Circuit protective device marking
Ensure that the circuit protective device marking is in accordance with AC 43.13-2B, Chapter 2,
Section 207, Sub-Section f., Paragraph (1).
5.0 VDC +/- 0.25 V
2.5 A per port
25 W
Table 3: Equipment specifications
Part Number
--
--
0640160201
Table 4: Required tools
Item
Table 5: Supplied hardware
600840-000041 Stratus Power Installation Instructions
Last Revised: December 15, 2016
Used For
Drilling hole in instrument panel
Measuring output power and polarity
Power connectors
Appareo Part Number
153510-000040
353070-000074
356060-000100
251015-000115
251015-000116
Rev. 1.0
Quantity
1
1
2
1
2
Page 6 of 12