Appareo Stratus Power 설치 지침 매뉴얼 - 페이지 6

{카테고리_이름} Appareo Stratus Power에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Appareo Stratus Power 12 페이지. Dual 2.1 amp usb charging hub

페이지 인쇄

1. Wiring Stratus Power

Output Voltage Range

Max Current Output

Power Output

*includes mating connector, excludes bend radius

1.6.

Required tools

The following tools are needed for installation of Stratus Power.

Tool

1 ¼ inch drill bit

Multimeter

Crimp tool

1.7.

Supplied hardware

Stratus Power Assembly

Stratus Power Panel Cover

Screw

Power Connector Receptacle

Connector Terminals

1.8.

Unpacking/inspection requirements

When unpacking Stratus Power, visually inspect for any damage to the unit or missing

components. If damage or missing parts are present, contact Appareo.

1.9.

Limitations for installation

This article meets the minimum performance and quality control standards required by a

technical standard order (TSO). If you are installing this article on or in a specific type or class of

aircraft, you must obtain separate approval for installation.

1.10.

Circuit protective device marking

Ensure that the circuit protective device marking is in accordance with AC 43.13-2B, Chapter 2,

Section 207, Sub-Section f., Paragraph (1).

5.0 VDC +/- 0.25 V

2.5 A per port

25 W

Table 3: Equipment specifications

Part Number

0640160201

Table 4: Required tools

Item

Table 5: Supplied hardware

600840-000041 Stratus Power Installation Instructions

Last Revised: December 15, 2016

Used For

Drilling hole in instrument panel

Measuring output power and polarity

Power connectors

Appareo Part Number

153510-000040

353070-000074

356060-000100

251015-000115

251015-000116

Rev. 1.0

Quantity

Page 6 of 12