DURKOPP ADLER 8967 Panduan Instalasi - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Mesin Jahit DURKOPP ADLER 8967. DURKOPP ADLER 8967 14 halaman. Preface and general safety information
Juga untuk DURKOPP ADLER 8967: Panduan Petunjuk Pengoperasian (15 halaman)

Halaman Cetak

5.2. Attaching the Belt Guard, Mounting and Setting the Synchronizer

–

Fasten the belt guard with 7 screws.

When tilting, the belt guard must go into the table top

cutout unimpaired.

–

Screw on the synchronizer.

–

Set the timing for "1st Position" and "2nd Position".

1st Position = Needle position slightly behind the

looping stroke.

2nd Position = Thread lever slightly before the

Attention!

It is essential to set the timing for the 1st and 2nd position

as described above. The motor manufacturer's instruction

give other values.

upper dead center.