DURKOPP ADLER 8967 Panduan Instalasi - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Mesin Jahit DURKOPP ADLER 8967. DURKOPP ADLER 8967 14 halaman. Preface and general safety information
Juga untuk DURKOPP ADLER 8967: Panduan Petunjuk Pengoperasian (15 halaman)

Halaman Cetak

5. Attaching the Machine Head

5.1 Mounting the Sewing Head, Establishing the Voltage

Compensation, Positioning the V-belt

–

Mount the sewing head and fasten with three M8 x

95 Allan screws with washers and nuts.

–

Establish the voltage compensation.

Screw the enclosed single-wire cable 1 to the sewing

head.

–

Positioning the V-belt.

–

Set the V-belt tension.

By swinging the motor, tension the V-belt so that it

can be pressed in at its center by about 10 mm

without great effort.

–

Screw on the motor belt guard.

Set the cams so that the belt cannot slide out of the

V-belt pulley when the sewing machine is swung to

the back.