DURKOPP ADLER 8967 Kurulum Kılavuzu - Sayfa 10

Dikiş Makinesi DURKOPP ADLER 8967 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. DURKOPP ADLER 8967 14 sayfaları. Preface and general safety information
Ayrıca DURKOPP ADLER 8967 için: Kullanım Talimatları Kılavuzu (15 sayfalar)

Sayfayı Yazdır

5. Attaching the Machine Head

5.1 Mounting the Sewing Head, Establishing the Voltage

Compensation, Positioning the V-belt

–

Mount the sewing head and fasten with three M8 x

95 Allan screws with washers and nuts.

–

Establish the voltage compensation.

Screw the enclosed single-wire cable 1 to the sewing

head.

–

Positioning the V-belt.

–

Set the V-belt tension.

By swinging the motor, tension the V-belt so that it

can be pressed in at its center by about 10 mm

without great effort.

–

Screw on the motor belt guard.

Set the cams so that the belt cannot slide out of the

V-belt pulley when the sewing machine is swung to

the back.