DURKOPP ADLER 550-867 Petunjuk Tambahan - Halaman 14

Jelajahi secara online atau unduh pdf Petunjuk Tambahan untuk Aksesori Mesin Jahit DURKOPP ADLER 550-867. DURKOPP ADLER 550-867 20 halaman. Btsr sensor

Halaman Cetak
DURKOPP ADLER 550-867 Petunjuk Tambahan
5

5.1 Fitting the thread guide

Abb. 14: Installing the thread guide
1. Attach the thread guide (2).
2. Tighten the screws (1).
3. The thread guide (2) must lie flush against the machine - bend the
Bend if required
Abb. 15: Position of thread guide
1. Check the position of the thread guide on the sewing machine arm.
2. If the position is correct, continue fitting the BTSR sensor.
12

Fitting the new parts

①
②
(1) - Screws
thread guide (2) by hand if necessary.
Position correct, lying
fully flush against the
sewing machine arm
Fitting the new parts
(2) - Thread guide
Too far away from the
sewing machine arm
Additional Instructions 550-867 - 01.0 - 08/2017