DURKOPP ADLER 550-867 Petunjuk Tambahan - Halaman 16
Jelajahi secara online atau unduh pdf Petunjuk Tambahan untuk Aksesori Mesin Jahit DURKOPP ADLER 550-867. DURKOPP ADLER 550-867 20 halaman. Btsr sensor
Halaman Cetak
5.3 Fitting the thread clamp
Abb. 18: Fitting the thread clamp
1. Insert the thread clamp (1) ensuring that the edge (4) of the thread
2. Tighten the screw (2).
Abb. 19: Attaching the sticker
Attaching the threading procedure
1. Remove the white protective film from the sticker (3).
2. Place the sticker (3) into position.
3. Press down on the sticker (3) so it is firm.
4. Carefully remove the transparent mounting film.
14
(1) - Thread clamp
clamp is parallel to the edge (4) of the BTSR sensor.
③
(2) - Screw
(3) - Sticker
(4) - Edges, parallel
Additional Instructions 550-867 - 01.0 - 08/2017
Fitting the new parts
①
②
④