DURKOPP ADLER 867 Petunjuk Tambahan - Halaman 13

Jelajahi secara online atau unduh pdf Petunjuk Tambahan untuk Aksesori Mesin Jahit DURKOPP ADLER 867. DURKOPP ADLER 867 20 halaman. Remaining thread monitor
Juga untuk DURKOPP ADLER 867: Petunjuk Manual (16 halaman), Petunjuk (4 halaman), Petunjuk Manual (16 halaman), Petunjuk Manual (8 halaman), Petunjuk Tambahan (18 halaman)

Halaman Cetak

Assembling the remaining thread monitor

Fig. 7: Connecting the remaining thread monitor on PREMIUM machines (2)

(1) - Circuit board

(2) - Magnet valve

3. Insert the magnet valve (2) into socket X16 on the circuit board (1).

4. Assemble the circuit board (1).

5. Tighten the connection plate (4) on the holder (3).

Fig. 8: Connecting the remaining thread monitor on PREMIUM machines (3)

(5) - Compressed air maintenance unit

(6) - Hose

Additional Instructions 867/867-M PREMIUM - 00.0 - 07/2018

①

If socket X16 is already occupied, use socket X17 or socket X18.

⑤

(3) - Holder

(4) - Connection plate

⑥

(7) - Valve

②

③

④

⑦