DURKOPP ADLER 867 Petunjuk Tambahan - Halaman 17

Jelajahi secara online atau unduh pdf Petunjuk Tambahan untuk Aksesori Mesin Jahit DURKOPP ADLER 867. DURKOPP ADLER 867 20 halaman. Remaining thread monitor
Juga untuk DURKOPP ADLER 867: Petunjuk Manual (16 halaman), Petunjuk (4 halaman), Petunjuk Manual (16 halaman), Petunjuk Manual (8 halaman), Petunjuk Tambahan (18 halaman)

Halaman Cetak
DURKOPP ADLER 867 Petunjuk Tambahan
Assembling the remaining thread monitor
Efka control (class 867 only)
Recommended mode for remaining thread monitor function:
Parameter F-195 on value "3"
Parameter
F-195
F-195
F-195
F-195
F-195
F-195
085
F-195
085
086
086
Information
A detailed functional description of the remaining thread monitor functions
and the stitch counts can be found in the instructions for use of the DA82GA
or DA321G controls.
Additional Instructions 867/867-M PREMIUM - 00.0 - 07/2018
Value
Function
0
Remaining thread monitor off
1
No stop after 1st detection Bobbin empty,
after thread cutting, sewing foot down
2
With stop after 1st detection Bobbin empty,
after thread cutting, sewing foot up
3
With stop after 1st detection Bobbin empty,
after thread cutting, sewing foot down
4
Hook thread monitoring via preset number
of stitches
Light barrier remaining thread monitor control
without function
1 - 3
0 - 9990
Number of stitches for remaining thread
Count from 1st detection Bobbin empty
until stop
4
0 - 9990
Number of stitches A for hook thread
monitoring
Pre-set number of stitches is counted
downwards to "0". When the value "0" is
reached: Stop at value 0 and after thread
cutting sewing foot down.
0 - 9990
Number of stitches B for hook thread
monitoring
Pre-set number of stitches is counted
downwards to "0". When the value "0" is
reached: Stop at value 0 and after thread
cutting sewing foot down.
0 - 9990
Number of stitches C for hook thread
monitoring
Pre-set number of stitches is counted
downwards to "0". When the value "0" is
reached: Stop at value 0 and after thread
cutting sewing foot down.
15