DURKOPP ADLER 867 Petunjuk Tambahan - Halaman 18

Jelajahi secara online atau unduh pdf Petunjuk Tambahan untuk Aksesori Mesin Jahit DURKOPP ADLER 867. DURKOPP ADLER 867 20 halaman. Remaining thread monitor
Juga untuk DURKOPP ADLER 867: Petunjuk Manual (16 halaman), Petunjuk (4 halaman), Petunjuk Manual (16 halaman), Petunjuk Manual (8 halaman), Petunjuk Tambahan (18 halaman)

Halaman Cetak
DURKOPP ADLER 867 Petunjuk Tambahan

2.4.2 Parameter settings for class 867-M PREMIUM

Important
PREMIUM machines require that the valve output be enabled for electro-
pneumatic needle cooling via software.
To enable the valve output via software:
1. Call up the Technician level.
 You are on the Technician level:
2. Open the submenu User config. > Output Config and select
3. Assign mode 2 (cleaning signal for RTM) to the output to which the
Machine output signal
RA (X16)
STL (X17)
STL (FA) (X18)
16
• Switch on the machine.
• Press the P and S buttons at the same time.
• Enter password (25483).
the parameter T 56 00.
remaining thread monitor is connected.
Assembling the remaining thread monitor
Output
X120B.12
X120B.22
X120B.23
Additional Instructions 867/867-M PREMIUM - 00.0 - 07/2018