DURKOPP ADLER 867 Extra instructies - Pagina 18

Blader online of download pdf Extra instructies voor {categorie_naam} DURKOPP ADLER 867. DURKOPP ADLER 867 20 pagina's. Remaining thread monitor
Ook voor DURKOPP ADLER 867: Gebruiksaanwijzing (16 pagina's), Instructies (4 pagina's), Gebruiksaanwijzing (16 pagina's), Gebruiksaanwijzing (8 pagina's), Extra instructies (18 pagina's)

Pagina afdrukken
DURKOPP ADLER 867 Extra instructies

2.4.2 Parameter settings for class 867-M PREMIUM

Important
PREMIUM machines require that the valve output be enabled for electro-
pneumatic needle cooling via software.
To enable the valve output via software:
1. Call up the Technician level.
 You are on the Technician level:
2. Open the submenu User config. > Output Config and select
3. Assign mode 2 (cleaning signal for RTM) to the output to which the
Machine output signal
RA (X16)
STL (X17)
STL (FA) (X18)
16
• Switch on the machine.
• Press the P and S buttons at the same time.
• Enter password (25483).
the parameter T 56 00.
remaining thread monitor is connected.
Assembling the remaining thread monitor
Output
X120B.12
X120B.22
X120B.23
Additional Instructions 867/867-M PREMIUM - 00.0 - 07/2018