DURKOPP ADLER H-TYPE ECO Petunjuk Tambahan - Halaman 16
Jelajahi secara online atau unduh pdf Petunjuk Tambahan untuk Aksesori Mesin Jahit DURKOPP ADLER H-TYPE ECO. DURKOPP ADLER H-TYPE ECO 18 halaman. Instructions for replacing the winder
Halaman Cetak
Fig. 19: Assembling the new tensioning plate
(14) - Cable push button panel
(16) - Connecting cable
17. Use the black plug to insert the cable of the push button panel (14) into
18. Use the white plug and the brown plug to connect the connecting
19. Place the belt cover back on and fix it in place with 4 screws.
20. Assemble the handwheel and fix it in place with 3 screws.
21. Tighten the right arm cover with 5 screws while reconnecting the lifter.
22. Re-tighten the left arm cover using 5 screws.
23. Plug the power cable back in.
24. Switch on the machine.
The machine is ready for sewing.
14
⑭
the matching slot on the circuit board.
cable (16) that supplies power to the winder via the control to pin 8 (18)
and pin 10 (19), respectively, of the X22 terminal strip on the circuit
board.
Assembling the new tensioning plate
(18) - Pin 8 (24V)
(19) - Pin 10 (0V)
Additional Instructions H-TYPE - 00.0 - 09/2017
⑲
⑱
⑯