DURKOPP ADLER H-TYPE ECO Petunjuk Tambahan - Halaman 14
Jelajahi secara online atau unduh pdf Petunjuk Tambahan untuk Aksesori Mesin Jahit DURKOPP ADLER H-TYPE ECO. DURKOPP ADLER H-TYPE ECO 18 halaman. Instructions for replacing the winder
Halaman Cetak
Fig. 15: Assembling the new tensioning plate
(16) - Connecting cable
11. Slip the connecting cable (16) (marked in red) through the slot and
Fig. 16: Assembling the new tensioning plate
12. Use the plugs to connect the cables with the control:
13. Carefully push the plug down, preventing you from being pinched by
14. Lay cables (14) and (15) and the pneumatic hoses (13) in the same
12
guide it to the control (9).
white/brown - white/brown (marked in red)
white/brown - white/brown (2-prong plug)
green/white/brown - green/white/brown (3-prong plug)
the arm cover.
way as the old cables, avoiding any wear, crushing and shearing points.
Assembling the new tensioning plate
Additional Instructions H-TYPE - 00.0 - 09/2017
⑯