DURKOPP ADLER H-TYPE ECO Ek Talimatlar - Sayfa 14

Dikiş Makinesi Aksesuarları DURKOPP ADLER H-TYPE ECO için çevrimiçi göz atın veya pdf Ek Talimatlar indirin. DURKOPP ADLER H-TYPE ECO 18 sayfaları. Instructions for replacing the winder

Sayfayı Yazdır

Fig. 15: Assembling the new tensioning plate

(16) - Connecting cable

11. Slip the connecting cable (16) (marked in red) through the slot and

Fig. 16: Assembling the new tensioning plate

12. Use the plugs to connect the cables with the control:

13. Carefully push the plug down, preventing you from being pinched by

14. Lay cables (14) and (15) and the pneumatic hoses (13) in the same

guide it to the control (9).

white/brown - white/brown (marked in red)

white/brown - white/brown (2-prong plug)

green/white/brown - green/white/brown (3-prong plug)

the arm cover.

way as the old cables, avoiding any wear, crushing and shearing points.

Assembling the new tensioning plate

Additional Instructions H-TYPE - 00.0 - 09/2017

⑯