DURKOPP ADLER H-TYPE Series Petunjuk Tambahan - Halaman 8
Jelajahi secara online atau unduh pdf Petunjuk Tambahan untuk Aksesori Mesin Jahit DURKOPP ADLER H-TYPE Series. DURKOPP ADLER H-TYPE Series 18 halaman. Instructions for replacing the winder
Halaman Cetak
Fig. 5: Disassembling the old tensioning plate
(3) - Screw
(4) - Belt cover
6. Loosen 3 screws (3) on the handwheel (6).
7. Remove the handwheel (6).
8. Loosen 4 screws (5) on the belt cover (4).
9. Remove the belt cover (4).
Fig. 6: Disassembling the old tensioning plate
(7) - Tensioning plate
10. Loosen 5 screws (8) on the tensioning plate (7).
11. Pull the tensioning plate (7) sightly forward to remove it.
6
③
④
⑦
⑧
Disassembling the old tensioning plate
⑥
(5) - Screw
(6) - Handwheel
(8) - Screw
Additional Instructions H-TYPE - 00.0 - 09/2017
⑤
⑧