DURKOPP ADLER H-TYPE Series Ek Talimatlar - Sayfa 8
Dikiş Makinesi Aksesuarları DURKOPP ADLER H-TYPE Series için çevrimiçi göz atın veya pdf Ek Talimatlar indirin. DURKOPP ADLER H-TYPE Series 18 sayfaları. Instructions for replacing the winder
Sayfayı Yazdır
Fig. 5: Disassembling the old tensioning plate
(3) - Screw
(4) - Belt cover
6. Loosen 3 screws (3) on the handwheel (6).
7. Remove the handwheel (6).
8. Loosen 4 screws (5) on the belt cover (4).
9. Remove the belt cover (4).
Fig. 6: Disassembling the old tensioning plate
(7) - Tensioning plate
10. Loosen 5 screws (8) on the tensioning plate (7).
11. Pull the tensioning plate (7) sightly forward to remove it.
6
③
④
⑦
⑧
Disassembling the old tensioning plate
⑥
(5) - Screw
(6) - Handwheel
(8) - Screw
Additional Instructions H-TYPE - 00.0 - 09/2017
⑤
⑧