4IPNET EAP706 Panduan Instalasi Cepat - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Instalasi Cepat untuk Titik Akses Nirkabel 4IPNET EAP706. 4IPNET EAP706 19 halaman. Enterprise access point

Halaman Cetak

Getting Started

4ipnet EAP706 supports web-based configuration. When hardware installation is complete, EAP706 can be

configured through a PC by using a web browser such as Mozilla Firefox 2.0 or Internet Explorer version 6.0

and above.

The default values of LAN IP address and subnet mask of EAP706 are:

IP Address: 192.168.1.1

Subnet Mask: 255.255.255.0

Steps:

1. To access the Web Management Interface, connect the administrator PC to the LAN port of EAP706 via

an Ethernet cable. Then, set a static IP address on the same subnet mask as EAP706 in TCP/IP of your

PC, such as the following example:

IP Address: 192.168.1.100

Subnet Mask: 255.255.255.0

2. Launch the web browser on your PC by entering the IP address of EAP706 (http://192.168.1.1) at the

address field, and then press Enter.

Example of entering EAP706's default IP Address via a web browser

3. The following Admin Login Page will appear. Enter "admin" for both the Username and Password fields,