4IPNET EAP706 빠른 설치 매뉴얼 - 페이지 11

{카테고리_이름} 4IPNET EAP706에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 4IPNET EAP706 19 페이지. Enterprise access point

Getting Started

4ipnet EAP706 supports web-based configuration. When hardware installation is complete, EAP706 can be

configured through a PC by using a web browser such as Mozilla Firefox 2.0 or Internet Explorer version 6.0

and above.

The default values of LAN IP address and subnet mask of EAP706 are:

IP Address: 192.168.1.1

Subnet Mask: 255.255.255.0

Steps:

1. To access the Web Management Interface, connect the administrator PC to the LAN port of EAP706 via

an Ethernet cable. Then, set a static IP address on the same subnet mask as EAP706 in TCP/IP of your

PC, such as the following example:

IP Address: 192.168.1.100

Subnet Mask: 255.255.255.0

2. Launch the web browser on your PC by entering the IP address of EAP706 (http://192.168.1.1) at the

address field, and then press Enter.

Example of entering EAP706's default IP Address via a web browser

3. The following Admin Login Page will appear. Enter "admin" for both the Username and Password fields,