Elsema INTELLIGENT SLIDER iS1500LV Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembuka Gerbang Elsema INTELLIGENT SLIDER iS1500LV. Elsema INTELLIGENT SLIDER iS1500LV 8 halaman. High speed sliding gate opener with battery back-up

Halaman Cetak

Once the limit switches are adjusted turn the power on to the MCSv2 control card and follow on

screen instructions to profile the gate. The MCSv2 control card has been specially configured

to be used with iS motor kit. For replacements please contact Elsema PTY.

Control Inputs

Push button

: N/O input acts as a OSC (open, stop, close) input.

Open

: N/O input acts as a open only (swipe mode) input.

: N/O input close only input (force close) input.

Ped Access

: Used for initiating a partial opening.

Photo Beam (P.E) : N/C safety input. Can be set for N/O operation if needed through menu 3.1.

PE beam operation modes can be changed through menu 4.2.

Control Outputs

12VDC

: Supplies regulated 12VDC at a max of 250mA, can be used for accessories such as pe

cells warning devices etc, but must not exceed 250mA.

24VDC

: Supplies 24VDC 1.0A regulated output, this can be used for higher power usage devices

such as induction loops. This output is fused at 1.0 A.

Output 1

: N/O dry contact relay output. Do not exceed 5A load. Can be set for various functions

through menu 5.1 default is Lock/Brake.

: Open Collector output. Can be used with Elsema's REL 1-12 relay card.

Output 2

ONTROL

OARD

AYOUT