4IPNET HSG1250 Panduan Instalasi Cepat - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Instalasi Cepat untuk Gerbang 4IPNET HSG1250. 4IPNET HSG1250 13 halaman. Wireless hotspot gateway

Hardware Installation

Please follow the following steps to install HSG1250:

1. Connect the power to the power socket on the rear panel.

2. The Power LED should be on to indicate a proper connection.

3. Connect an Ethernet cable to the WAN1 Port on the front panel. Connect the other end of the Ethernet

cable to an xDSL/cable modem, or a switch/hub of an internal network. The LED of this port should be on

to indicate a proper connection.

Connect an Ethernet cable any LAN Port on the front panel. Connect the other end of the Ethernet cable to

an administrator PC for configuring the HSG1250 system, an AP for extending wireless coverage, a switch

for connecting more wired clients, or a client PC. The LED of this LAN port should be on to indicate a

proper connection.

HSG1250

Wireless Hotspot Gateway

HSG1250

④

Quick Installation Guide

ENGLISH