4IPNET HSG1250 빠른 설치 매뉴얼 - 페이지 6

{카테고리_이름} 4IPNET HSG1250에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 4IPNET HSG1250 13 페이지. Wireless hotspot gateway

Hardware Installation

Please follow the following steps to install HSG1250:

1. Connect the power to the power socket on the rear panel.

2. The Power LED should be on to indicate a proper connection.

3. Connect an Ethernet cable to the WAN1 Port on the front panel. Connect the other end of the Ethernet

cable to an xDSL/cable modem, or a switch/hub of an internal network. The LED of this port should be on

to indicate a proper connection.

Connect an Ethernet cable any LAN Port on the front panel. Connect the other end of the Ethernet cable to

an administrator PC for configuring the HSG1250 system, an AP for extending wireless coverage, a switch

for connecting more wired clients, or a client PC. The LED of this LAN port should be on to indicate a

proper connection.

HSG1250

Wireless Hotspot Gateway

HSG1250

④

Quick Installation Guide

ENGLISH