Elsner 70512 Instalasi dan Penyesuaian - Halaman 10

Jelajahi secara online atau unduh pdf Instalasi dan Penyesuaian untuk Pengontrol Elsner 70512. Elsner 70512 20 halaman. Multifunctional actuators

Control of an external motor control unit via the output:

control unit

Manual switch input

Inputs:

Actuators KNX S1R-UP • Version: 27.05.2020 • from software version 4.00, ETS programme version 4.00 •

Motor

Technical changes and errors excepted.

Note: The Actuators KNX S1R-UP can

also be used with direct-current voltage

(12 V DC, 24 V DC) due to their potential-

free output. The „L" connector is used as

„Com" in this case. The automatic runtime

measurement is not possible with direct-

currant voltage!

Example KNX S1R-B4-UP with

binary contact on input 1

and T-NTC temperature sensor on input 4.

Connection of the temperature sensor is in-

dependent of the polarity.

Installation and start-up