CB2 GLOSS Petunjuk Perakitan - Halaman 2
Jelajahi secara online atau unduh pdf Petunjuk Perakitan untuk Perabotan Dalam Ruangan CB2 GLOSS. CB2 GLOSS 4 halaman. Tall dresser
Juga untuk CB2 GLOSS: Petunjuk Perakitan (4 halaman)
Halaman Cetakgloss
NIGHTSTAND
left and right
side panels
Insert 4 wood dowels and 2 cams into left and
right side panels as shown. Make sure arrows
on each cam points towards the nearest edge
1
with holes.
NOTE: Make sure grooves
of left and right side panels
are facing each other during
assembly as shown
left side
panel
bottom
panel
Fit dowels on side panels into corresponding holes
of bottom panel as shown. Attach bottom panel
with 4 bolts, 4 spring washers and 4 flat washers,
3
using a screwdriver. Do not over tighten the bolts.
Made in Vietnam - r04
NOTE: Make sure arrows
on each cam points towards
the nearest edge with holes
right side
panel
NOTE: Do not
over tighten
the bolts
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
top panel
Insert 4 cam screws into top panel as shown.
Secure, but do not over tighten, cam screws with
2
a phillips head screwdriver.
Position unit upright. Fit back panel into
4
corresponding grooves of side panels as shown.
NOTE: Do not
over tighten
the cam screws
back panel
Page 2 of 4