CB2 GLOSS 조립 지침 - 페이지 2
{카테고리_이름} CB2 GLOSS에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. CB2 GLOSS 4 페이지. Tall dresser
CB2 GLOSS에 대해서도 마찬가지입니다: 조립 지침 (4 페이지)
페이지 인쇄gloss
NIGHTSTAND
left and right
side panels
Insert 4 wood dowels and 2 cams into left and
right side panels as shown. Make sure arrows
on each cam points towards the nearest edge
1
with holes.
NOTE: Make sure grooves
of left and right side panels
are facing each other during
assembly as shown
left side
panel
bottom
panel
Fit dowels on side panels into corresponding holes
of bottom panel as shown. Attach bottom panel
with 4 bolts, 4 spring washers and 4 flat washers,
3
using a screwdriver. Do not over tighten the bolts.
Made in Vietnam - r04
NOTE: Make sure arrows
on each cam points towards
the nearest edge with holes
right side
panel
NOTE: Do not
over tighten
the bolts
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
top panel
Insert 4 cam screws into top panel as shown.
Secure, but do not over tighten, cam screws with
2
a phillips head screwdriver.
Position unit upright. Fit back panel into
4
corresponding grooves of side panels as shown.
NOTE: Do not
over tighten
the cam screws
back panel
Page 2 of 4