CBC H2 Buku Petunjuk - Halaman 4

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Aksesori Kamera CBC H2. CBC H2 4 halaman. Security camera housing

7. Attach power to connector terminal block. Block mounting

plate can be removed for ease of installation by loosening

two screws to slide and lift the plate. Power must be

connected to terminals 2 and 3. Ground can be connected to

terminal 4 or optional installation by crimping ground to ring

terminal on the grounding stud. Attach terminal block plate

to housing base and tighten screws.

8. Position camera into housing and attach back and white

wires to camera power terminal as recommended by the camera manufacture.

9. Attach video cable to camera or other device as specified by the camera or device manufacture.

10. Position cables to relieve excess stress and tighten the cable gland fittings using ¾" wrench.

11. Slide cover into place, tighten two Phillips head screws to secure.

12. Attach housing to mounting bracket and set position.

3. SERVICE

If the unit ever needs repair or service, please contact the dealer or manufacture's sales representative.

4. CARE AND MAINTENANCE

If the unit needs cleaning, use a soft damp cloth to wipe the external cover and viewing window.

5. ACCESSORIES

Recommended:

WB1 – Wall Mounting Bracket with feed through Adjustable Head feature

SS1 – Sunshield to promote cooling by protecting the housing from direct sunlight

6. SPECIFICATIONS

MECHANICAL

Construction

Color

Power

Operating Temerature w/heater and sunshield ‐40 ~ 55C

Storage Temerature

Weight ‐ Product

Weight ‐ Shipping

Size

See following drawings for additional dimensional information.

UV Protected Powder Coated Aluminum Body, Front and Rear Caps;

UV Protected Silicone Seals; Glass Window for HD Optical Clarity

Cool Gray (Pantone 1C)

12V to 24V; w/heater 10Watts; 420mA @ 24Vac

‐65C to 65C

2.6‐lbs w/out camera and lens

3.0‐lbs

4.4"H x 4.35"W x 11.6"L

Page 4