CBC H2 사용 설명서 - 페이지 4
{카테고리_이름} CBC H2에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CBC H2 4 페이지. Security camera housing
7. Attach power to connector terminal block. Block mounting
plate can be removed for ease of installation by loosening
two screws to slide and lift the plate. Power must be
connected to terminals 2 and 3. Ground can be connected to
terminal 4 or optional installation by crimping ground to ring
terminal on the grounding stud. Attach terminal block plate
to housing base and tighten screws.
8. Position camera into housing and attach back and white
wires to camera power terminal as recommended by the camera manufacture.
9. Attach video cable to camera or other device as specified by the camera or device manufacture.
10. Position cables to relieve excess stress and tighten the cable gland fittings using ¾" wrench.
11. Slide cover into place, tighten two Phillips head screws to secure.
12. Attach housing to mounting bracket and set position.
3. SERVICE
If the unit ever needs repair or service, please contact the dealer or manufacture's sales representative.
4. CARE AND MAINTENANCE
If the unit needs cleaning, use a soft damp cloth to wipe the external cover and viewing window.
5. ACCESSORIES
Recommended:
WB1 – Wall Mounting Bracket with feed through Adjustable Head feature
SS1 – Sunshield to promote cooling by protecting the housing from direct sunlight
6. SPECIFICATIONS
MECHANICAL
Construction
Color
Power
Operating Temerature w/heater and sunshield ‐40 ~ 55C
Storage Temerature
Weight ‐ Product
Weight ‐ Shipping
Size
See following drawings for additional dimensional information.
UV Protected Powder Coated Aluminum Body, Front and Rear Caps;
UV Protected Silicone Seals; Glass Window for HD Optical Clarity
Cool Gray (Pantone 1C)
12V to 24V; w/heater 10Watts; 420mA @ 24Vac
‐65C to 65C
2.6‐lbs w/out camera and lens
3.0‐lbs
4.4"H x 4.35"W x 11.6"L
Page 4