Datamax Apex 3 Panduan Memulai Cepat - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Printer Datamax Apex 3. Datamax Apex 3 4 halaman. Portable thermal receipt printer
Juga untuk Datamax Apex 3: Spesifikasi (4 halaman), Spesifikasi (4 halaman)

Installing the Paper Roll

1. Open the Paper Supply Cover by placing your fi ngers under the "T"
pull lever and pulling up fi rmly on the supply cover until the lever stops
moving. The cover should open to a 90° angle.

2. Install paper roll

3. Close the Paper Supply Cover.
4. Turn the printer ON by pressing the Power button and test the paper
advance function by pressing the paper feed button. Verify that paper
advances correctly.

Tearing Paper

To tear paper: The printer's
paper door acts as a tear
bar. Pull one edge of the
paper against the tear bar
as indicated, then tear
down and across against
the tear bar to tear the
paper.
Note: Do not pull too fi rmly. Use
Note: Pull Paper Roll Leader Out
of Printer. Note Direction of
Paper Travel.
Note: Pulling up and/or sideways without using the
tear bar can cause a paper jam due to paper
misalignment in the printhead mechanism.
only enough force to allow
the cover to unlock and
lift freely.