Datamax Apex 3 빠른 시작 매뉴얼 - 페이지 3

{카테고리_이름} Datamax Apex 3에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Datamax Apex 3 4 페이지. Portable thermal receipt printer
Datamax Apex 3에 대해서도 마찬가지입니다: 사양 (4 페이지), 사양 (4 페이지)

페이지 인쇄

Installing the Paper Roll

1. Open the Paper Supply Cover by placing your ﬁ ngers under the "T"

pull lever and pulling up ﬁ rmly on the supply cover until the lever stops

moving. The cover should open to a 90° angle.

2. Install paper roll

3. Close the Paper Supply Cover.

4. Turn the printer ON by pressing the Power button and test the paper

advance function by pressing the paper feed button. Verify that paper

advances correctly.

Tearing Paper

To tear paper: The printer's

paper door acts as a tear

bar. Pull one edge of the

paper against the tear bar

as indicated, then tear

down and across against

the tear bar to tear the

paper.

Note: Do not pull too ﬁ rmly. Use

Note: Pull Paper Roll Leader Out

of Printer. Note Direction of

Paper Travel.

Note: Pulling up and/or sideways without using the

tear bar can cause a paper jam due to paper

misalignment in the printhead mechanism.

only enough force to allow

the cover to unlock and

lift freely.