Dutchess 270 Manual Petunjuk Operator - Halaman 6

Jelajahi secara online atau unduh pdf Manual Petunjuk Operator untuk Peralatan Dapur Dutchess 270. Dutchess 270 9 halaman. French bread/bun & bagel slicer

Halaman Cetak

Refer to Page 9, Figure 3 for parts locations.

Step 1. Remove the Top Guard [8] by removing the three (3) Small Black Knobs [7].

Step 2. Remove the three (3) screws securing the Blade and carefully remove the Blade.

Step 3. Replace the clean (or new) Blade and tighten the three (3) screws to secure the Blade.

IMPORTANT: Make sure that the points on the teeth are pointing in the opposite

direction of the rotation of the Blade, which is clockwise when looking at the shaft end

of the Motor.

Step 4. Replace the Top Guard [8], replace and tighten the three (3) Small Black Knobs [7].

CHANGING THE BLADE or CLEANING BLADE AREA

Figure 3

ELECTRICAL SCHEMATIC - MODEL 270

M-943975

TOOLS REQUIRED: Standard Screw Driver

TURN THE MACHINE OFF AND DISCONNECT

THE POWER SUPPLY BEFORE PERFORMING

ANY TYPE OF SERVICING, CLEANING,

MAINTENANCE OR INSPECTIONS.

The Blade on the Model 270 Slicer will coast to a

stop after the power is switched off. To prevent

personal injury or possible damage to the Slicer

components, wait for the Blade to stop com-

pletely before making any adjustments.

MOTOR

Motor

M-943975

WARNING:

SWITCH