Datamax M-Class Mark II Panduan Memulai Cepat - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Pembaca kode batang Datamax M-Class Mark II. Datamax M-Class Mark II 8 halaman. Rfid option
Juga untuk Datamax M-Class Mark II: Manual (6 halaman), Manual (8 halaman), Panduan Memulai Cepat (4 halaman), Manual (10 halaman), Panduan Memulai Cepat (8 halaman), Panduan Memulai Cepat (6 halaman)
Halaman Cetak
Start with the Right Media
Use RFID media that meets the specifications required by the encoder type:
HF Media Layout
Forward
Movement
C
B
Designator
A
Label Width
B
Label Lengths
C
Chip Location Tolerance
D
Label Pitch (minimum)
E
Chip Inlay Location
[1]
See the Operator's Manual for additional standard media requirements.
[2]
The HF RFID Chip Inlay Location can be left, right, or center justified.
[3]
Definitions referenced by looking down onto the labeling side of the media, and from the leading edge of the label (or
tag) as it moves forward through the printer.
Note:
If you have questions selection, contact a Media Representative at (407) 523-5650.
Smart Label and Tag Requirements
[2]
D
E
A
Definitions
Description
2
[1]
UHF Media Layout
C
B
A
[3]
Dimension
Inches
4.00
2.00
± 0.05
1.75
1.1
Forward
Movement
D
E
Millimeters
101.6
50.8
± 1.3
44.4
27.9