Datamax M-Class Mark II Panduan Memulai Cepat - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Pembaca kode batang Datamax M-Class Mark II. Datamax M-Class Mark II 8 halaman. Rfid option
Juga untuk Datamax M-Class Mark II: Manual (6 halaman), Manual (8 halaman), Panduan Memulai Cepat (4 halaman), Manual (10 halaman), Panduan Memulai Cepat (8 halaman), Panduan Memulai Cepat (6 halaman)
Halaman Cetak
Set the Printer
RFID default settings (listed below by encoder [MODE] type) can be modified via the Control Panel:
HF RFID Default Settings (MODE = HF):
RFID POSITION = 1.1
TAG TYPE = ISO 15693
RETRY ATTEMPTS = 3
UHF RFID Default Settings (MODE = UHF):
RFID POSITION = 1.1
TAG TYPE = GEN 2
TAG DATA SIZE = 96-BIT
RETRY ATTEMPTS = 3
Change an RFID default by selecting, modifying, and saving the desired setting(s):
Step
1
Press MENU.
Using the DOWN Button, scroll to PRINTER OPTIONS and then
2
press ENTER.
3
Scroll to RFID and then press ENTER.
Scroll to the setting to be modified (for example, RETRY ATTEMPTS)
4
and then press ENTER.
Enter the desired setting, and then press ENTER. An asterisk will
5
appear next to the setting.
Press ESC; and, at the SAVE CHANGES prompt, press ENTER to
6
complete the setup.
Notes: (1) If NOT INSTALLED is displayed after selecting RFID, the wrong device may be enabled;
go to the MODE setting and ensure that the correct RFID device has been selected.
(2) To restore factory defaults, select SET DEFAULTS in the RFID options menu.
Instruction
3
Display