Datamax Performance series Panduan Instalasi - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Pemotong Datamax Performance series. Datamax Performance series 9 halaman.
Juga untuk Datamax Performance series: Panduan Instalasi (15 halaman)
Halaman CetakCutter and Tray Installation Procedure
Warning:
To prevent serious injury, never place a finger or object other than media near
the cutter mechanism.
Caution:
Never cut paper or media in an area where adhesives exist. Doing so will
damage the cutter and void the manufacturer's warranty.
Caution:
The media cover will not close with both the cutter and present sensor installed
at the same time.
Caution:
The printer must be powered off and disconnected from AC utility power prior
to the cutter installation.
Cutter
Note:
The printer and the cutter tray must be on the same level surface.
Note:
The 6" cutter does not have a tray.
1. Remove the lower cover from the printer.
Figure: 2 - 3 Lower Cover
5
Cutter Installation Guide | 2
Cutter Installation Guide