Datamax Performance series 설치 매뉴얼 - 페이지 7

{카테고리_이름} Datamax Performance series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Datamax Performance series 9 페이지.
Datamax Performance series에 대해서도 마찬가지입니다: 설치 매뉴얼 (15 페이지)

페이지 인쇄

Cutter and Tray Installation Procedure

Warning:

To prevent serious injury, never place a finger or object other than media near

the cutter mechanism.

Caution:

Never cut paper or media in an area where adhesives exist. Doing so will

damage the cutter and void the manufacturer's warranty.

Caution:

The media cover will not close with both the cutter and present sensor installed

at the same time.

Caution:

The printer must be powered off and disconnected from AC utility power prior

to the cutter installation.

Cutter

Note:

The printer and the cutter tray must be on the same level surface.

Note:

The 6" cutter does not have a tray.

1. Remove the lower cover from the printer.

Figure: 2 - 3 Lower Cover

Cutter Installation Guide | 2

Cutter Installation Guide