Datamax Performance series 설치 매뉴얼 - 페이지 9

{카테고리_이름} Datamax Performance series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Datamax Performance series 9 페이지.
Datamax Performance series에 대해서도 마찬가지입니다: 설치 매뉴얼 (15 페이지)

페이지 인쇄

4. Rotate the cutter until it magnetically locks into place.

5. Activate the cutter option in the Options menu by selecting Menu > Advanced >

Printer > Options > Cutter.

Note:

Feed a label through the printer and observe the cut distance to ensure it cuts on

the gap. If it cuts on the label, adjust your Cut Distance Adjust settings in the

Adjustments menu.

Note:

A negative value moves the cut line toward the current label being printed. A

positive value moves the cut line toward the next label to be printed.

Cutter Tray

The cutter tray collects labels and media after they have been cut. The tray may be

installed before or after the installation of the cutter.

1. Place the tray mounting hooks into the baseplate slots.

Note:

For a clearer illustration, the cutter has been removed from the illustration below.

Note:

Cutter Tray only available with the 4-inch model.

Figure: 2 - 6 Cutter Tray Installation

Mounting Hooks

Baseplate

Slots

Cutter Installation Guide | 2

Cutter Installation Guide