Datamax Performance series Installation Manual - Page 9

Browse online or download pdf Installation Manual for Cutter Datamax Performance series. Datamax Performance series 9 pages.
Also for Datamax Performance series: Installation Manual (15 pages)

Print Page

4. Rotate the cutter until it magnetically locks into place.

5. Activate the cutter option in the Options menu by selecting Menu > Advanced >

Printer > Options > Cutter.

Note:

Feed a label through the printer and observe the cut distance to ensure it cuts on

the gap. If it cuts on the label, adjust your Cut Distance Adjust settings in the

Adjustments menu.

Note:

A negative value moves the cut line toward the current label being printed. A

positive value moves the cut line toward the next label to be printed.

Cutter Tray

The cutter tray collects labels and media after they have been cut. The tray may be

installed before or after the installation of the cutter.

1. Place the tray mounting hooks into the baseplate slots.

Note:

For a clearer illustration, the cutter has been removed from the illustration below.

Note:

Cutter Tray only available with the 4-inch model.

Figure: 2 - 6 Cutter Tray Installation

Mounting Hooks

Baseplate

Slots

Cutter Installation Guide | 2

Cutter Installation Guide