Datapath VSNMicro N600 Panduan Memulai Cepat - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Pengontrol Datapath VSNMicro N600. Datapath VSNMicro N600 16 halaman.
Halaman CetakSTEP 6 POWERING UP THE SYSTEM
If you have an ATX powered system, go straight to step 2 below.
For systems with an RPSU:
During transit, the Power Supply Modules are removed therefore you are required
to fit them prior to using your VSNMicro 600. To fit the Power Supply Modules,
remove all the packaging and carefully slide them into the power supply unit on the
rear of the system with the protective grill uppermost. You will feel and hear a firm
click when they are in place. For detailed instructions on how to fit the Power Supply
Modules see the PDF User Guide which can be found on the Recovery Media.
Never use force when inserting the Power Supply Modules as this can cause damage
not covered under the Datapath warranty.
1
Ensure Power Supply Modules are correctly fitted.
Page 6