Datapath VSNMicro N600 빠른 시작 매뉴얼 - 페이지 6

{카테고리_이름} Datapath VSNMicro N600에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Datapath VSNMicro N600 16 페이지.

STEP 6 POWERING UP THE SYSTEM

If you have an ATX powered system, go straight to step 2 below.

For systems with an RPSU:

During transit, the Power Supply Modules are removed therefore you are required

to fit them prior to using your VSNMicro 600. To fit the Power Supply Modules,

remove all the packaging and carefully slide them into the power supply unit on the

rear of the system with the protective grill uppermost. You will feel and hear a firm

click when they are in place. For detailed instructions on how to fit the Power Supply

Modules see the PDF User Guide which can be found on the Recovery Media.

Never use force when inserting the Power Supply Modules as this can cause damage

not covered under the Datapath warranty.

Ensure Power Supply Modules are correctly fitted.

Page 6