Dataprobe iBoot-Exp Manual - Halaman 4

Jelajahi secara online atau unduh pdf Manual untuk Perangkat Keras Komputer Dataprobe iBoot-Exp. Dataprobe iBoot-Exp 5 halaman. Expansion module for iboot

Halaman Cetak
5.1.
Physical
Height
Width
Depth
Weight
MTBF
Temperature
5.2.
AC
Input
Input Cord
Voltage Range
Switched
Receptacle
Capacity
5.3.
When using
this produ
persons, incl
uding the following:
.
1
Read and
understand all in
2.
Follow all warnings and ma
3.
Unplug this product from the w
or aerosol cleaners. Use a damp cloth for cleaning.
4.
Do not use this product in an outdoor environment or near water, for example, near a
bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a
swimming pool.
5.
Do not place this product on an unstable cart, stand, or table. The product may fall,
causing serious damage to the product.
6.
Slots and openings in this product and the back or bottom are provided for ventilation
to protect it from overheating; t
openings should never be blocke
other similar surface. This prod
heat register. This product shoul
ventilation is provided.
7.
This product should be operated only from the type of power source indicated on the
marking label. If you are not sure of the type of power supply to your home, consult
your dealer or local power company.
8
.
This product is equipped with a three wire g
(grounding) pin. This plug will only fit into a grounding type power outlet. This is a
safety feature. If you are unable to inse
electrician to replace your obsolete outlet. Do not d
grounding type plug. Do not use a 3-to-2 prong adapter at the receptacle; use of this
type adapter may result in risk of electrical shock and/or damage to this product.
9.
Do not allow anything to rest on the power cord. Do not locate this product where the
cord will be abused by persons walking on it.
V100921e

5. Specifications

2.0" 60mm
3.2" 82mm
4.2" 107mm
8.6 oz 244g
540,000 Hours
0 – 50 degrees C
IEC 320 C14
16AW
GX3C 10A 25
0
UL/CSA/VDE Rated
(1.25m
m2X3C)
Auto S
ensing 105-2
40 VAC
IEC 3
20 C13
12 A Max at 105-125 VAC,
10 A Max at 210-240 VAC

6. Important Safety Instructions

ct, basic safety
precautions should always be followed to r
structions.
rked on the product.
all outlet before cleaning. Do not use
liquid cleaners
hese openings must not be blocked or covered. The
d by placing the product on the bed, sofa, rug, or
uct should never be placed near or over a radiator or
d not be placed in a built-in installation unless proper
rounding type plug, a plug having a third
rt the plug into the outlet, contact your
efeat the safety purpose of the
Save These Instructions
iBoot-EXP
Power and Control Connections
Four position removable screw terminals.
18AWG maximum.
Maximum distance to iBoot-G2+
330feet/100m using 24AWG wire.
+V
External + 12VDC input provided by
iBoot G2+
I
Control Input. Contact closure or open
collector transistor circuit only
O
Status feedback. Open collector circuit.
Open = Power On, Grounded =
Off
5
.4.
Compliance
UL/cUL
UL60950 Listed I.T.E
CE
Di
rectives 89/336/EEC, 92/31/EEC and
93
/68/EEC
E
N 60950: 3rd Edition
E
N 55022: 1998 Class B
FCC
Part 15 Class B
educe the risk of fire, elec
1
0. Do no
t overloa
d wall outlets and extensio
electric shock.
11. Never push objects of any kind into this product through slots as they may touch
dangerous voltage points or short out parts that could result in a risk of fire or
electrical shock. Never spill liquid of any kind on the product.
12. To reduce the risk of electrical shock, do not disassemble this product, but take it to a
qualified serviceman when some service or repair work is required. Opening or
removing covers may expose you to dangerous voltages or other risks. Incorrect re-
assembly can cause electric shock when the appliance is subsequently used.
13. Unplug this product from the wall outlet and refer servicing to qualified service
personnel under the following
conditions:
a)
When the power supply
cord or plug is damaged or frayed.
b)
If liquid has been spilled
into the product.
c)
If the product has been
exposed to rain or water.
d)
If the product does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions
because improper adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to restore the product to
normal operation.
e)
If the product has been dropped or has been damaged.
f)
If the product exhibits a distinct change in performance.
14. Avoid using a telephone (other than a cordless type) during an electrical storm.
There may be a remote risk of electric shock from lightning.
15.
Do not use the telephone to report a gas leak in the vicinity of the leak.
16. Do not exceed the maximum output rating of the auxiliary power receptacle
Power
File No. 188
tric shock, and injury to
n cords as this can result in the risk of fire or
Page 4