Aussie Monsoon 100 Buku Petunjuk - Halaman 6

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Mesin Cuci Tekanan Aussie Monsoon 100. Aussie Monsoon 100 16 halaman. Monsoon series

Halaman Cetak

Aussie Pumps

FRAME & WHEEL CARE .... MAINTAIN OPTIMUM PERFORMANCE

Aussie Monsoon blasters now come

fitted with top quality flat free tyres.

To maintain tyre shape ...

1. Ensure that straps used to secure

the unit during transit are not over

tightened to the point where tyres

misshape.

Before proceeding with assembly of your new Aussie

Eco AB high pressure blaster, check that all parts

listed below are included.

1 Gun with melted handle



1 Vario lance



1 High pressure hose



1 Grit blast kit



Machine Preparation (initial start-up)

1. Check the oil in the pump.

With the machine on a level surface the oil lever

should cover the red spot in the oil level sight glass

on the front of the machine. If necessary, top up

with SAE 75W-90. Do not mix different grades of

oil as this may affect the machines performance. If

alternative oil is used, first empty out oil by

unscrewing drain plug in bottom of machine.

Breather plug

Pump oil sight glass

Aussie Monsoon Single Phase Blasters ... Operation & Maintenance Manual

2. Do not leave the unit strapped

down for extended periods.

3. Do not drop the unit; this could

cause frame distortion or damage

bearings.

ASSEMBLY & PREPARATION FOR USE

2. Ensure breather plug is fitted to pump.

WARNING: Before operation ensure top mounted

travel plug is replaced by breather plug. Failure to

fit breather and keep clean can result in over

pressuring of oil chamber (crank case) and can

blow oil seals. This will void warranty.

3. Plug in machine to suitable power supply.

NOTE: Unit supplied with a 15 amp plug. A 10

amp plug can be retro fitted but the pump pressure

will need to be adjusted down to reduce amps

drawn by the motor. This should only be done by a

qualified technician.

4. Assemble gun/lance assembly.

VARIO LANCE: To assemble the lance, insert lance

into gun and screw together.

March 2018