DVDO DVDO-Xtend-TX100 Panduan Pengguna - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pemancar DVDO DVDO-Xtend-TX100. DVDO DVDO-Xtend-TX100 19 halaman. 3 x 1 hdbt wall-plate transmitter

Halaman Cetak

DVDO

Installation and Wiring

Warnings:

Before wiring, disconnect the power from all devices.



During wiring, connect and disconnect the cables gently.



Steps for device wiring:

Connect HDMI sources (such as Blu-ray, DVD, HDD, camera, games

console, Satellite/cable TV, computer, media server etc.) to the Transmitter.

Connect a good quality, well-terminal Cat 5e/6/6a/7 cable from the HDBT

OUT port of the transmitter to HDBT IN Input of an HDBT Receiver with PSE

module.

Note: 90m @4K or 100m @1080p video are maximum recommended

transmission distances for this model and denotes perfect transmission

conditions – including straight cable runs with no electrical interference, bends,

kinks, patch panels or wall outlets.

If any of the above is a factor in your installation, transmission range may be

affected – take care to avoid where possible.

Connect the USB port to the PC, at the same time connect the receiver's

USB ports to USB devices (such as keyboard, mouse and interactive

whiteboard) to realize the remote control.

Connect an HDMI display device (LED/LCD display or projector) to the

HDMI OUT of your HDBT Receiver.

Connect for additional control options:

•

USB Control: Connect a host PC to USB B port on front panel of the

transmitter, connect USB devices such as USB camera, keyboard,

mouse to USB DEVICE ports of receiver, the USB devices can be

connected to host PC.

•

API Command Control: Connect Micro USB B port to USB port of PC via

the USB B to USB A cable. Or connect a control PC to the receiver.

More information, see "API Command Control" section.

Power on the HDBT receiver which support PoH function, it will power to

Transmitter.

DVDO-Xtend-TX100 3 x 1 HDBT Wall-plate Transmitter User Manual

DVDO-Xtend-TX100_V1.0.0