DVDO DVDO-Xtend-TX100 Panduan Pengguna - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pemancar DVDO DVDO-Xtend-TX100. DVDO DVDO-Xtend-TX100 19 halaman. 3 x 1 hdbt wall-plate transmitter

Halaman Cetak

DVDO

Input Switching

The transmitter supports automatic switching and front panel button switching.

When it is powered on, automatic switching will function as follows:

When HDMI sources are inserted, the switcher will follow the rule: last in,

first out, switch to the latest connected source for output display.

When the HDMI source selected is removed, the switcher will switch to the

active source with top priority for output display (Default priority: HDMI

IN1>HDMI IN2>HDMI IN3).

The front panel SELECT INPUT button is used for selecting input source

when HDMI video signals are valid.

Note: Automatic Switching function can only detect 5V of the input source

device. If the selected HDMI source in standby mode provides a continuous 5V

power output, the Automatic Switching function will not work, i.e. the switcher

will not switch the input to other active sources. In this case, please turn off the

standby source device selected or remove it from the switcher.

DVDO-Xtend-TX100 3 x 1 HDBT Wall-plate Transmitter User Manual

DVDO-Xtend-TX100_V1.0.0