DVIGear WILDCAT DVI-7570 Panduan Pengguna - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pemanjang DVIGear WILDCAT DVI-7570. DVIGear WILDCAT DVI-7570 14 halaman. 4k hdmi cat6 extender set

Halaman Cetak

unit. Connect an HDMI or DVI display device (e.g. projector) to the HDMI OUT

on the receiver unit.

Additionally, the transmitter includes a buffered HDMI Loop Output for a local

HDMI display. Use of a High Speed HDMI

cable or High Speed HDMI to

DVI-D cable such as DVIGear's High Resolution (HR™) Series is recommended.

Connect an HDMI or DVI display device (e.g. local monitor) to the HDMI OUT on

the transmitter unit.

The receiver features both a de-embedded Analog and a Digital (TOSLINK) audio

output to facilitate connections to an external audio system such as a sound bar

or speaker system.

Note: Proper operation of this product depends on the use of high quality cables. CAT6A

S/FTP (550 MHz) 23AWG twisted pair cable is recommended to maximize extension distances.

4.2

Power Connections and Bi-Directional Power over CAT Cable

The DVI-7570 is capable of being powered on either the transmitter or receiver

side, with the opposite side receiving its power over the CAT cable (POC). This

feature eliminates the need for a second external power supply at either the

receiver or transmitter.

For POC operation, connect the supplied AC Power Adapter to the 12 VDC

Power Input on either unit and then to a working AC power source. Once the

unit detects the POC compatible unit on the other side of the connection, it will

provide power over the CAT cable. If non-POC operation is desired, simply

connect the optional AC Power Adapter to the 12 VDC Power Input on both

units. In this case, the units will not supply power to each other.

Note: This product utilizes a locking DC power connector to prevent the power cable from

disengaging. Insert the DC plug into the power input jack on the rear panel, then gently rotate

the locking collar in the clockwise direction until it is secure. To remove the power connection,

simply unscrew the locking collar counter-clockwise and then extract the power cable.

-8-