Cook's essentials CM-GR103SA Panduan Pemilik - Halaman 14
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk panggangan Cook's essentials CM-GR103SA. Cook's essentials CM-GR103SA 18 halaman. Electric bbq grill
Halaman Cetak
Using the Temperature Control
Powering Up the Barbecue
1. Make sure the OFF symbol on the Temperature Control
Dial (part #7b) is fully turned to the light Indicator
location. (Fig. 1, page 12). The light should not be
illuminated.
Fig. 2
Hint: The tip of the Temperature Control Thermostat Prong should
be above the nearby punch hole on the Heat Reflector Plate when it
is fully inserted. (Fig. 3, page 12).
3. Plug the Temperature Control Wall Plug (part #7c) into a dry ground-fault circuit-interrupter (GFCI)
power outlet.
WARNING: Using an extension cord is NOT recommended. If an extension cord is absolutely
necessary, carefully follow the instructions in the Important Safeguards on page
4. Adjust the setting on the Temperature Control Dial to desired temperature level. (Fig. 1, page 12).
Settings on the Temperature Control are indicated by temperature marks on the circular dial,
including the 'OFF' position marking. The light indicator will illuminate while the unit is heating, and
will switch on and off during the cooking cycle. The unit is usually packed with the Temperature Dial
set to the "OFF' position.
Turning Off the Barbecue
1. Turn the Temperature Control Dial to the 'OFF' position.
2. Unplug the power cord from the wall outlet.
3. Once the Barbecue has cooled down, unplug the Temperature Control from the Barbecue.
2. Insert the Temperature Control Thermostat Prong (part #7a) with
the Temperature Control Dial facing up, into the Opening for the
Temperature Control (part #2a) at the front of the unit just below the
rim of the Bowl. (Fig. 2, page 12). Push in all the way to be sure it is
making full contact.
12
Fig. 1
F
Fig. 3
2.