Datecs INFINEA X Panduan Pengguna - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembaca kode batang Datecs INFINEA X. Datecs INFINEA X 14 halaman.

Halaman Cetak
1 DATECS InfineaX
User manual
`

4.6 Clearing Bluetooth pairing info

- Hold on same time status and rear speaker button until the device is beep twice, if after
that the devices is still not showing on iOS device available for connecting press on same
"battery status" and "scan" button for ~5sec.
*Note: If after Bluetooth paring info clearing, InfineaX is not visible, perform with "Reset
InfineaX" (4.11)

4.7 Switching between Rear and Front Speakers.

- For changing active speaker, press speaker switching button.
When the rear speaker is active, blue led is light.

4.8 Automatic charge

- When the battery level is above 3,9V – InfineaX is automatically start to charge iPhone5 or
iPod5. (If the option is enabled in settings)

4.9 Vibration on scan

- This function can be enabled or disabled

4.10 Pass-through sync through mini USB

- This function can be enabled or disabled

4.11 Reset the InfineaX

- Holding on same time status and scan button for ~5sec

4.12 Scanning barcodes

The InfineaX uses a scan engine that supports one-dimensional (1D) and two-dimensional
(2D) barcode symbols. The effective reading distance of the barcode reader varies
depending on the barcode size.
Scanning Barcodes:
To scan a barcode fist activate the scanner. Then position the scan head to center the
red aiming laser near the center of the barcode and the illumination box is over the outer
edges of the barcode.
Slowly pull back the unit increasing the distance between the barcode and scan head until
the barcode has been read by the scanner.
13