4RF Aprisa LTE Panduan Memulai Cepat - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Router Nirkabel 4RF Aprisa LTE. 4RF Aprisa LTE 7 halaman. Lte cellular router
Juga untuk 4RF Aprisa LTE: Panduan Memulai Cepat (7 halaman)

Halaman Cetak
4RF Aprisa LTE Panduan Memulai Cepat
Page 6

5. Configure the Aprisa LTE

1.
Verify that the Aprisa LTE active software and LTE module are
correct for the provider.
Go to SuperVisor > Cellular > Summary to view the currently
supported bands.
2.
Go to SuperVisor > Cellular > General to view the SIM status.
•
Set the SIM PIN
Note: not all cellular operators use a pin to enable the SIM
card so the SIM pin may not be required
•
Set the Preferred Provider to match that of the SIM card
3.
Go to SuperVisor > Cellular > General
•
Set the Packet Data Network (PDN) Profile Name (if
required)
•
Set the active / backup Access Point Names (APNs) per your
installed SIM(s)
•
Set the SIM slot
•
Tick Roam if you require roaming on the Packet Data
Network profile
4.
If the Wi-Fi network module is installed on your LTE, go to
SuperVisor > Interfaces/Networking > WiFi and click Edit.
•
Set the Wi-Fi password ESSID, Network type and security
settings