4RF Aprisa LTE 빠른 시작 매뉴얼 - 페이지 6

{카테고리_이름} 4RF Aprisa LTE에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 4RF Aprisa LTE 7 페이지. Lte cellular router
4RF Aprisa LTE에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (7 페이지)

4RF Aprisa LTE 빠른 시작 매뉴얼
Page 6

5. Configure the Aprisa LTE

1.
Verify that the Aprisa LTE active software and LTE module are
correct for the provider.
Go to SuperVisor > Cellular > Summary to view the currently
supported bands.
2.
Go to SuperVisor > Cellular > General to view the SIM status.
Set the SIM PIN
Note: not all cellular operators use a pin to enable the SIM
card so the SIM pin may not be required
Set the Preferred Provider to match that of the SIM card
3.
Go to SuperVisor > Cellular > General
Set the Packet Data Network (PDN) Profile Name (if
required)
Set the active / backup Access Point Names (APNs) per your
installed SIM(s)
Set the SIM slot
Tick Roam if you require roaming on the Packet Data
Network profile
4.
If the Wi-Fi network module is installed on your LTE, go to
SuperVisor > Interfaces/Networking > WiFi and click Edit.
Set the Wi-Fi password ESSID, Network type and security
settings